The non-start-stop chiller actually controls the temperature of the refrigerant circulating water in the chiller to control the temperature of the refrigerating circulating water. According to the manufacturing principle of the chiller, it is divided into two control modes, and the control mode of the refrigerant flow direction is adopted within 5 degrees, so that the chiller can accurately control the temperature at plus or minus 0.1 degrees, and adopt the compressor start-stop mode at 5 degrees. Allows the chiller to work energy-saving without the need for intense cooling. Based on the working mode of the chiller, the cooling accuracy requirements of the chiller can basically be satisfied (the control method of the refrigerant flow direction can be adopted with high precision).
The rest is the cooling power and the selection of the pump. As long as the specific heat is considered, the chiller with different cooling capacity can be selected, and then the pump head and flow demand can be selected to select different pumps. This will find the right chiller.